Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Joyetech eGo AIO Mansion
#1
Introducing Joyetech’s NEW eGo AIO Mansion

Designed in California, Modeled after the New York Skyscrapers, Assembled in China.

Click for Image Album: https://imgur.com/a/0xkEdnh

This is not a POD, it’s a simple to operate all in one device with no display, and simple one button controls. To use the Mansion just install a primed coil, fill the 2ml tank, turn it on, and puff from the mouthpiece. There is a fire button but you don’t need to press it, just take a puff and the Mansion will automatically fire.

The built in tank is integral with the battery. The replaceable BF SS316 0.6ohm MTL coil head is positioned into the tank by attaching the coil to a small top cap under the mouthpiece. The coil and top cap then screws into the tank and is tightened with a screwdriver that is included under the mouthpiece. There is an airflow adjustment on the small top cap. The tank is easy to refill even with a glass dripper.

Once filled the liquid level can be seen in a transparent LED lit window on both sides of the battery. The LED light color can be changed by clicking the control button 3 times, then press the button to cycle the light from white, black (off), blue, green, cyan, red, purple and yellow. The device will let you know when it is time to charge it by flashing the LED.

To operate the device, just turn it on with the normal 5 clicks and take a puff by drawing on the mouthpiece. How simple is that? I wish they had this when I quit smoking, I could have saved thousands in patches, gum, lozenges and atomic fireballs.

[Image: giphy.gif]
(I tried my best @steampugs)

FEATURES:
Easy no control operation
Automatic button less puff
Easy to fill the liquid tank
Easy to see liquid level
Micro USB Charging
Works like a POD
AIO convenience
DTL or MTL
No leak design
Adjustable Airflow
7 color changeable LED light
Refillable tank and changeable coils
Textured metal battery is easy to hold onto
High quality BF SS316 coils with organic cotton

WISHLIST:
Heats up when DTL chain vaping (but this device hits hard enough you don’t want to do that anyway!) *
No lanyard loop to add a chain and hang it around my neck *
The mouthpiece protective cover falls off
More suited for lower mg e-liquid *
More suited for MTL vaping *
Non removable tank
Button very small *
*Note: it was difficult to think of things for the ’wishlist’ so if I have something listed wrong feel free to mentally move it onto the ‘feature’ list.

SPECIFICATIONS:
Size: 102mm long X 30.5mm wide X 17.7mm height (measured)
Weight: 81.4g or 2.9oz (empty)
Power: 1300mAh built in battery
Capacity: 2ml
Coil: BF SS316 0.6 MTL
Colors: Orange, Black, White, Silver, Gold and Rose

I think this is a great AIO device, I would recommend this over all the previous AIO devices, and even the PODS that I have previously tried. My Dolphin and ECO will be jealous, but the auto fire is a game changer, especially with the great flavor and cloud that the Mansion delivers. Of course I’m sure it has all the safety features Joyetech is known for, the only safety feature I could test is the 10 second puff time limit but I’m sure over charge, and over discharge is also on board.

Package contents:
1 X eGo AIO MANSION
2 X BF SS316 0.6 ohm coils
1 X Micro USB charge cable
1 X Multilanguage Mansion Quick Start Guide
1 X Warranty Card
1 X Coil prime and fill information card
1 X package of spare parts ~ includes 3 O-rings, and 2 liquid fill port stoppers
Reply
#2
[Image: HlZ8Ycl.jpg]
Handcheck 微笑
Reply
#3
It is a great little device Cosmic as you say. The loose cap issue has apparently been taken care of now by the factory, I'm still testing mine, huge clouds and great flavour!
Reply
#4
I figured they would fix that pretty quick. Someone asked me what the output power is.
Reply
#5
It looks very promising. I've been looking into quasi-pod AIOs lately and besides the Mi-One, this one also uses the BF coils I use for a bunch of my other devices. That's a WIN.

1 question: Do the new ProC-BF coils fit, too? They're said to be backwards compatible, but since they're a bit fatter, they may not fit this device?

2 suggestions:
It would be so nice to have a top cap that can fit on the bottom as well, just not to lose it while you're using the device.
A little hole/entry for a lanyard would be really good to have.
Reply
#6
(09-07-2018, 07:13 PM)tailland Wrote:  It looks very promising. I've been looking into quasi-pod AIOs lately and besides the Mi-One, this one also uses the BF coils I use for a bunch of my other devices. That's a WIN.

1 question: Do the new ProC-BF coils fit, too? They're said to be backwards compatible, but since they're a bit fatter, they may not fit this device?

2 suggestions:
It would be so nice to have a top cap that can fit on the bottom as well, just not to lose it while you're using the device.
A little hole/entry for a lanyard would be really good to have.

It's great, amazing flavour. One of the useful features is the variable top air flow, adjusted on the "coil base" that the coils screw into. I've happily been DTL-ing with it, but I'm not very fussy so.... It's very elegant too, without a "plasticy" feel.

I doubt the ProC-BF will fit as the coil has to fit into a coil sized hole to enter the tank, but someone may know better.

Agree about the top cap. A lanyard, not sure about that, it would spoil the lines wherever you put it, maybe just below the USB port so it hangs correctly?

@cosmic Power- The box says Max Output 30W, so likely 20-25W. It certainly is efficient going by the volume of vapour.
Reply
#7
Thanks, I knew I had seen it somewhere!

On top cap design, It could even be a flip top hinged top cap, and at the hinge a lanyard loop.
Something like the design seen the hinge on a zippo lighter, but with a loop. Hard to describe but I see it in my minds eye 微笑

On coils I'm thinking just that one BF SS316 0.6ohm head will work right, but they do great in this device.
Reply
#8
(09-08-2018, 06:44 AM)CosmicTruth Wrote:  Thanks, I knew I had seen it somewhere!

On top cap design, It could even be a flip top hinged top cap, and at the hinge a lanyard loop.
Something like the design seen the hinge on a zippo lighter, but with a loop. Hard to describe but I see it in my minds eye 微笑

On coils I'm thinking just that one BF SS316 0.6ohm head will work right, but they do great in this device.
ya i agree needs a better top cap design. and as for the coil im not a big fan, i find the flavor is muted
Reply
#9
(09-11-2018, 08:42 AM)bey1012 Wrote:  
(09-08-2018, 06:44 AM)CosmicTruth Wrote:  Thanks, I knew I had seen it somewhere!

On top cap design, It could even be a flip top hinged top cap, and at the hinge a lanyard loop.
Something like the design seen the hinge on a zippo lighter, but with a loop. Hard to describe but I see it in my minds eye 微笑

On coils I'm thinking just that one BF SS316 0.6ohm head will work right, but they do great in this device.
ya i agree needs a better top cap design. and as for the coil im not a big fan, i find the flavor is muted

The flavor is good, just not as good as the ProCore Coils. Might need to buy a large bulk package of the coils as they taste great when new.
Another Pro: no spitback with the mouthpiece design.
Reply
#10
(09-11-2018, 08:39 PM)CosmicTruth Wrote:  
(09-11-2018, 08:42 AM)bey1012 Wrote:  
(09-08-2018, 06:44 AM)CosmicTruth Wrote:  Thanks, I knew I had seen it somewhere!

On top cap design, It could even be a flip top hinged top cap, and at the hinge a lanyard loop.
Something like the design seen the hinge on a zippo lighter, but with a loop. Hard to describe but I see it in my minds eye 微笑

On coils I'm thinking just that one BF SS316 0.6ohm head will work right, but they do great in this device.
ya i agree needs a better top cap design. and as for the coil im not a big fan, i find the flavor is muted

The flavor is good, just not as good as the ProCore Coils. Might need to buy a large bulk package of the coils as they taste great when new.
Another Pro: no spitback with the mouthpiece design.

They do flood and I have had it auto fire on me 2 times when a bubble forms on the mouth piece
Reply


Bookmarks

Forum Jump:


Users browsing this thread: 1 Guest(s)