Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ProCore Coil Compatibility 40+ coils
#1
Joyetech ProCore coils, are the standard coils for all the Joyetech ProCore Series tanks:
ProCD 0.15ohm Kanthal reticular (mesh) coil DL 40-80W
ProCA 0.4ohm Kanthal for DL 40-80W
ProC1 0.4ohm Kanthal for DL 40-80W
ProC1-S 0.25ohm Kanthal for MTL/DL 25-55W
ProC2 0.15ohm dual NiCr coil for DL 30-70W
ProC3 0.2ohm triple NiCr coil for DL 70-90W
ProC4 0.15ohm quad NiCr coil for DL 60-80W

Have you heard…

There are a few other coils that might fit ProCore series Tanks, the reader will need to further research to see if they may have any of these tanks and if their coils will fit and safely work in the Joyetech ProCore Conquer Tank. The following is furnished for information purposes only; I have not personally tested any of these coils to see if they even screw in. Of course you will be responsible for any damage of any kind, and I’m sure your warranty will be voided if you use non Joyetech coils in the Conquer tank. The wide range of possibilities may however give you opportunity to use the Conquer for TC mode, give ceramic coil possibilities, and maybe even a rebuild-able (RBA) coil, or possibly a ProCD mesh coil for your Baby Beast:

SMOK TFV8 baby coils, these are used for the SMOK TFV8 Baby Beast:
Baby Beast V8-T8 Octuple Coil 0.15ohm: 50-110W / Best: 60-80W
Baby Beast V8-Q2 Dual Coil 0.4ohm: 40-80W / Best: 55-65W
Baby Beast V8-Q2 Dual Coil 0.6ohm: 20-50W / Best: 30-40W
Baby Beast V8-X4 Quadruple Coil 0.15ohm: 30-70W / Best: 45-60W
Baby Beast V8-T6 Sextuple Coil 0.2ohm: 40-130W / Best: 70-90W
Baby Beast V8-M2 Dual Coil 0.25ohm: 25-45W / Best: 35W = Optimized for the SMOK Stick V8 (3.7 Direct Output Voltage)
Baby Beast V8-M2 Dual Coil 0.15ohm: 25-45W / Best: 35W = Optimized for the SMOK Stick V8 (3.7 Direct Output Voltage)
Baby Beast V8-T12 Duodecuple Coil 0.15ohm: 50-90W / Best: 60-80W

AsMODus Ohmie coils; these are used in the Asmodus Ohmie Tank:
0.5ohm Dual Kanthal Coil Atomizer: 40 - 60W
0.2ohm Sextuple Kanthal Coil Atomizer: 70 - 90W

Eleaf HW Kanthal coil Atomizer heads, these are used in the Ello and Ello Mini tanks:
HW2 Dual-Cylinder 0.3 ohm 30-70W (Best 45-65W)
HW3 Triple-Cylinder 0.2 ohm 50-130W (Best 70-90W)

E-XY T1 coils, these are used in the E-XY T1 RBA Tank:
E-XY T1 0.2ohm

Geekvape iM4 coils, these Kanthal coils are used for the Illusion Mini Tank:
iM4 0.15ohm quad 50-120W (best 60-80W)
Illusion RBA?

iJoy XS coils, these are used in the Ijoy Exo S and Ijoy Exo X:
0.1ohm XS-C4 Quad Coil - rated for 40-100W
0.4ohm XS-C1 Single Coil - rated for 40-80W

Karnoo T1 coils, these are used in the Karnoo T1 Sub Ohm Tanks:
T1 0.2ohm
T1 V2 0.4ohm

Sigelei SM coils, these are used for the SLYDR M Sub-Ohm tanks and the KAOS Sub-Ohm Tank:
SM2 0.4ohm Single coil 40-75W (best 50-65W)
SM4 0.15ohm Dual coil 30-65W (best 40-55W)
SM6 0.2ohm Triple coil 40-120W (best 75-95W)

Vapefly Fantasy Mini M8 coils, these are used as an alternative to the SMOK TFV8 Baby Beast, SMOK TFV8 Big Baby Beast, Ijoy Exo S and Ijoy Exo X:
M8 – 0.15 ohm octuple coil head 50-120W (best 60W-80W)

Vaporesso NRG coils, these are used in the Vaporesso NRG Mini Tank:
GT2 Kanthal 0.4ohm: 40 - 80W / Best 55 - 65W
GT4 Kanthal 0.15ohm: 30 - 70W / Best 45 - 60W
GT6 Kanthal 0.2ohm: 40 - 100W / Best 70 - 90W
GT8 Kanthal 0.15ohm: 50 - 110W / Best 60 - 80W
GT CCell Ceramic 0.3ohm: 25W-40W
GT CCell Ceramic 0.5ohm: 15W-35W

Vaptio Frogman coils, these are used for the Frogman Tank:
0.4ohm Frogman-W2 Single coil 30W to 80W
0.15ohm Frogman-W4 Dual coil 30W to 70W
0.2ohm Frogman-W6 Triple coil 40W to 130W
0.15ohm Frogman-W8 Quadruple coil 50W to 110W

WOTOFO FLOW coils, these are used for Flow Sub Ohm Tank:
0.25ohm Parallel Dual Coil 35 - 60W

That is a lot of coil possibilities!
Take note however these coils may not be 100% cross compatible, the Baby Beast V8-X4 Quadruple Coil 0.15ohm fit and worked great in a Joyetech ProCore Aries tank but Joyetech ProC4 would not fit into a Smok Baby Beast tank. And in my opinion Joyetech coils are better in most cases than the competitors.
Reply
#2
Very useful, thanks!
Reply
#3
Yes, it needs to be noted that they may or may not be compatilbe, depends on the tides, moon, shaman priests and so on. In fact, nearly all ProC cores are working with other tanks, but other cores are not working with ProCore.
Technical Specialist at Vardex, Russia.
Joyetech aficionado.
Reply
#4
noted!
Yes but the ProC coil C1 is wide at the base so will not screw into the Smok Baby Beast tank. While the Baby Beast coils I tried seem to fit fine in ProCore tanks.
The Vaporesso 0.5 ohm coil screwed into the Joyetech ProCore AIR, so it adds a TC Ceramic Coil for the ProC tanks. I'm using one now.
Reply
#5
this is awesome! thanks Cosmic!!
微笑  smoke free since January 2014 ?微笑
Reply
#6
(05-16-2018, 12:43 AM)Liz (glizz) Wrote:  this is awesome! thanks Cosmic!!

You are welcome, remember I have not actually tested all the coils listed. We should do comparisons and tests to see what works.
I think it was you that told me Baby Beast coils fit? They do but I think none are SS coils.So no TC their, but they do seem to fit and work so it adds that versatility and coil selection.
Reply


Bookmarks

Forum Jump:


Users browsing this thread: 1 Guest(s)