Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ProCore Coil Compatibility 40+ coils
#1
Joyetech ProCore coils, are the standard coils for all the Joyetech ProCore Series tanks:
ProCD 0.15ohm Kanthal reticular (mesh) coil DL 40-80W
ProCA 0.4ohm Kanthal for DL 40-80W
ProC1 0.4ohm Kanthal for DL 40-80W
ProC1-S 0.25ohm Kanthal for MTL/DL 25-55W
ProC2 0.15ohm dual NiCr coil for DL 30-70W
ProC3 0.2ohm triple NiCr coil for DL 70-90W
ProC4 0.15ohm quad NiCr coil for DL 60-80W

Have you heard…

There are a few other coils that might fit ProCore series Tanks, the reader will need to further research to see if they may have any of these tanks and if their coils will fit and safely work in the Joyetech ProCore Conquer Tank. The following is furnished for information purposes only; I have not personally tested any of these coils to see if they even screw in. Of course you will be responsible for any damage of any kind, and I’m sure your warranty will be voided if you use non Joyetech coils in the Conquer tank. The wide range of possibilities may however give you opportunity to use the Conquer for TC mode, give ceramic coil possibilities, and maybe even a rebuild-able (RBA) coil, or possibly a ProCD mesh coil for your Baby Beast:

SMOK TFV8 baby coils, these are used for the SMOK TFV8 Baby Beast & Big Baby Beast & TFV12 Baby Prince, OSUB Plus Kit, Stick V8 Kit and Brit Beast Tanks:
Baby Beast V8-T8 Octuple Coil 0.15 Ω: 50-110W / Best: 60-80W
Baby Beast V8-Q2 Dual Coil 0.4 Ω: 40-80W / Best: 55-65W
Baby Beast V8-Q2 Dual Coil 0.6 Ω: 20-50W / Best: 30-40W
Baby Beast V8-X4 Quadruple Coil 0.15 Ω: 30-70W / Best: 45-60W
Baby Beast V8-T6 Sextuple Coil 0.2 Ω: 40-130W / Best: 70-90W
Baby Beast V8-M2 Dual Coil 0.25 Ω: 25-45W / Best: 35W = Optimized for the SMOK Stick V8 (3.7 Direct Output Voltage)
Baby Beast V8-M2 Dual Coil 0.15 Ω: 25-45W / Best: 35W = Optimized for the SMOK Stick V8 (3.7 Direct Output Voltage)
Baby Beast V8-T12 Duodecuple Coil 0.15 Ω: 50-90W / Best: 60-80W
Baby Beast V8-Baby Mesh 0.15 Ω 40-80W / Best 60-70W
Baby Beast V8-Baby Strip 0.15 Ω 40-100W / Best 80-90W

Advken Dominator and Manta Sub Ohm Tank
0.16 Ω SS Best at 60~80W
Mesh Coil 0.2 Ω
Mesh Coil 0.16 Ω

Dominator RBA?

AsMODus Ohmie coils; these are used in the Asmodus Ohmie Tank:
0.5 Ω Dual Kanthal Coil Atomizer: 40 - 60W
0.2 Ω Sextuple Kanthal Coil Atomizer: 70 - 90W

Carrys T4-R
U1 50W 0.6 Ω
U2 25W 1.5 Ω MTL

Clrane Baby Mesh Coil Head for SMOK TFV12 Baby Prince
0.15ohm mesh 40-80W (BEST:60-70W)
X6 0.15ohm 50-120W (BEST:80-100W)
T6 0.2ohm 40-130W (BEST:70-90W)
T10 0.12ohm 5 cyl 50-300 (BEST:130-190W)

Coilart Mage Subtank
MAGE MESH coil 0.2 Ω 50-90W (Best 60-80W)
MAGE coil 0.2 Ω 50-100W (Best 60-70W)
MAGE coil 0.4 Ω 30-80W (Best 40-50W)

Coil Father Baby Subohm Q2/X4/T6/T8 Replacement Coils:
P Subohm Baby Q2 0.4ohm 40W-80W Best 55-65W
P Subohm Baby X4 0.15ohm 30W-70W Best 45-60W
P Subohm Baby T6 0.2ohm 50W-240W Best 110-150W
P Subohm Baby T8 0.15ohm 50W-110W Best 60-80W

Eleaf HW Kanthal coil Atomizer heads, these are used in the Ello and Ello Mini ELLO Vate & ELLO Duro tanks:
HW1 SS316L COILS 0.2 Ω 50W – 65W
HW2 Kanthal Dual-Cylinder 0.3 Ω 30-70W (Best 45-65W)
HW3 Kanthal Triple-Cylinder 0.2 Ω 50-130W (Best 70-90W)
HW4 Kanthal quad cylinder 0.3 Ω 40W–110W
HW1-C Ceramic 0.25 Ω: 25-50w best 35-40w
HW-M 0.15 Ω Kanthal Mesh 50-100w best 65-75w
HW-N 0.2 Ω Kanthal Mesh 40-90w best 65-75w

E-XY T1 coils, these are used in the E-XY T1 RBA Tank:
E-XY T1 0.2 Ω

Geekvape iM coils, used for the Cerberus sub ohm tank, Illusion Mini & Aero Mesh Tank:
iM1 0.40 Ω 40 - 60W Kanthal
iM4 0.15 Ω quad 50-120W (best 60-80W) Kanthal
X1 0.2 Ω Kanthal Mesh 30-90W (Best 60-80W)

Illusion RBA?

iJoy XS coils, these are used in the Ijoy Exo S and Ijoy Exo X:
0.1 Ω XS-C4 Quad Coil - rated for 40-100W
0.4 Ω XS-C1 Single Coil - rated for 40-80W

Jomotech Smartvape TC80
0.4Ω (Best For 30W-60W)

Karnoo T1 coils, these are used in the Karnoo T1 Sub Ohm Tanks:
T1 0.2 Ω
T1 V2 0.4 Ω

Marvec Priest AIO
0.2 Ω 40-130W Best: 70-90W
AIO RBA coil ~ note: replace the bottom thick o’ring with the o’ring from your baby beast compatible coil

Medusa TFV8 BABY Staple Clapton Coils
Staple Clapton Coil (BABY-STP) 0.25Ω coil 35 to 80W :low_brightness::high_brightness:
Dual Core Tank Track Coil (BABY-TRK) 0.35Ω coil 70 to 120W
Mesh Coil (BABY-NET) 0.2Ω mesh coil 50 to 70W

OBS Draco, V and Cube Damo Coils
M1 0.2ohm mesh coil 30-80W (best 35-70W)
M6 OCC Coil 0.2ohm 40-80W (best 50-70W)
Draco 0.3ohm quadruple coil(30-80W (best 35-70W)
V4 OCC Dual Coil Design 0.15ohm 120-260W, Best 140-230W
V8 OCC Quadruple Coil Design 0.15ohm 90-180W, Best 110-160W
V10 OCC Decuple Coil Design 0.15ohm 60-100W, Best 70-90W
V12 OCC Twelvefold Coil Design 0.15 60-150W, Best 70-90W

Rev Tech Drift & Drift II Tank Sub-Ohm Tanks
M1 0.18ohm 40-80W Best 60-70W
M3 0.15 55-90W Best 70-85W
M4 0.15 50-100W Best 75-85W
R1 Single Core 0.6ohm 20-50W Best: 30-40W
R2 Dual Cores 0.15ohm 30-70W Best: 40-60W
R3(Tri Cores)
R4 Quadruple Cores 0.15ohm 50-110W Best: 60-80W
S1 0.4 35-80W Best 50-70W
S2 0.15 40-80W Best 55-70W
S4 0.15 45-110W Best 65-85W

Sigelei SM coils, these are used for the SLYDR M, T3, Prism, Vi Ictor (Victor) and KAOS Sub-Ohm Tanks:
SM2 0.4 Ω Single coil 40-75W (best 50-65W)
SM4 0.15 Ω Dual coil 30-65W (best 40-55W)
SM6 0.2 Ω Triple coil 40-120W (best 75-95W)

Smoant Battlestar Tank
0.4 ohm Ni80 OCC 40 to 60W
0.15 ohm Ni80 OCC Dual Vertical 35 to 55W

SQUID PEACEMAKER Tank
B1 0.4 Ω dual coils 40-80W / Best at 55-65W
B4 0.15 Ω octuple coils 50-110W / Best at 60-80W

Tesla H8 Mini tank
E2 coil 0.4 Ω (40W-80W)
E8 quad coil 0.15 Ω (50W-110W)

Vapefly Fantasy Mini:
M2 double coil head 0.5Ω 40-70w
M8 – 0.15 Ω octuple coil head 50-120W (best 60W-80W)

Vaporesso NRG coils, these are used in the Vaporesso NRG Mini Cascade Mini and Cascade BabyTank:
GT2 Kanthal 0.4 Ω: 40 - 80W / Best 55 - 65W
GT4 Kanthal 0.15 Ω: 30 - 70W / Best 45 - 60W
GT6 Kanthal 0.2 Ω: 40 - 100W / Best 70 - 90W
GT8 Kanthal 0.15 Ω: 50 - 110W / Best 60 - 80W
GT CCell SS316 Clapton w/ Ceramic 0.5 Ω: 15W-40W :low_brightness::high_brightness:

Vaportech Morpheus
M4 0.15ohm Coil (30-70W)
M8 0.15ohm Coil (50-110W)

Vapesoon V8 Baby Mesh Coil for SMOK TFV12 Baby Prince
0.15 ohm Mesh 40~80W (Best 60~70W)

Vapesoul VOne Sub-Ohm Tank:
VapeSoul Vone Octo Coil: 0.15 Ω Wattage: 40W-120W (Best: 50W-110W)

Vaptio and/or VivaKita coils, these are used for the Vaptio and VivaKita Frogman and CAPT N Sub-Ohm Tanks:
0.4 Ω Frogman-W2 Single coil 30W to 80W
0.15 Ω Frogman-W4 Dual coil 30W to 70W
0.2 Ω Frogman-W6 Triple coil 40W to 130W
0.15 Ω Frogman-W8 Quadruple coil 50W to 110W

Volcanee Coil Head for TFV8 Baby
T8 0.15OHM 50-110W (Best 60-80W)
M2 Replacement: 0.25ohm
Q2 : 0.4ohm 40-80W (Best 55-65W)
X4 Replacement: 0.15ohm

WOTOFO FLOW coils, these are used for Flow Sub Ohm & Flow Pro Tank:
0.25 Ω Parallel Dual Coil 35 - 60W
0.18 Ω Mesh-Like Multihole Coil 40 - 60W

That is a lot of coil possibilities!
Take note however these coils may not be 100% cross compatible, the Baby Beast V8-X4 Quadruple Coil 0.15ohm fit and worked great in a Joyetech ProCore Aries tank but Joyetech ProC4 would not fit into a Smok Baby Beast tank. And in my opinion Joyetech coils are better in most cases than the competitors.
Reply
#2
Very useful, thanks!
Reply
#3
Yes, it needs to be noted that they may or may not be compatilbe, depends on the tides, moon, shaman priests and so on. In fact, nearly all ProC cores are working with other tanks, but other cores are not working with ProCore.
[Image: banner1.jpg]
[Image: logo2.png]
Reply
#4
noted!
Yes but the ProC coil C1 is wide at the base so will not screw into the Smok Baby Beast tank. While the Baby Beast coils I tried seem to fit fine in ProCore tanks.
The Vaporesso 0.5 ohm coil screwed into the Joyetech ProCore AIR, so it adds a TC Ceramic Coil for the ProC tanks. I'm using one now.
Reply
#5
this is awesome! thanks Cosmic!!
微笑  smoke free since January 2014 ?微笑
Reply
#6
(05-16-2018, 12:43 AM)Liz (glizz) Wrote:  this is awesome! thanks Cosmic!!

You are welcome, remember I have not actually tested all the coils listed. We should do comparisons and tests to see what works.
I think it was you that told me Baby Beast coils fit? They do but I think none are SS coils.So no TC their, but they do seem to fit and work so it adds that versatility and coil selection.
Reply
#7
Can anyone please test if the ProC coils fit into a (new) Smok X-BABY tank ? It COULD work since it's not a small 22mm tank, in which the ProC coils wouldn't fit.
This compatibiliy would be awesome, because the X-baby is a leak-free top-airflow tank !!!

EDIT: Seems they built new "x baby" coils with an integrated outer chimney to fit the top airflow system. too bad.
Reply
#8
(08-24-2018, 10:38 AM)tailland Wrote:  Can anyone please test if the ProC coils fit into a (new) Smok X-BABY tank ? It COULD work since it's not a small 22mm tank, in which the ProC coils wouldn't fit.
This compatibiliy would be awesome, because the X-baby is a leak-free top-airflow tank !!!

EDIT: Seems they built new "x baby" coils with an integrated outer chimney to fit the top airflow system. too bad.
No, it won't work at all. X Baby is totally different tank, and it's alerady discontinued, as far as I know. There is no leaks from ProCore tanks for me as well, they are definetly better than Baby tanks.
[Image: banner1.jpg]
[Image: logo2.png]
Reply
#9
I have a ProCore tank too, it's never leaked.
Reply
#10
(08-24-2018, 07:55 PM)Ippolit Wrote:  I have a ProCore tank too, it's never leaked.

You have my envy  眨眼
Reply


Bookmarks

Forum Jump:


Users browsing this thread: 1 Guest(s)