Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Update 1.01
#1
New Espion software ui 1.01 not updating?
Reply
#2
(04-14-2018, 11:04 AM)Siggy Wrote:  New Espion software ui 1.01 not updating?

Please update the firmware first and synchronize the UI file after to complete the update.
Vaping is like a Tsunami
You cannot stop it with a law
Reply
#3
(04-14-2018, 02:46 PM)Vapeoholic Wrote:  
(04-14-2018, 11:04 AM)Siggy Wrote:  New Espion software ui 1.01 not updating?

Please update the firmware first and synchronize the UI file after to complete the update.

Yes ui will not update.

Not sure why you call ui update a sync .

There are 2 buttons update and ui.

we are essentially flashing firmware

I am familiar with the flash process.

I am here to tell you the ui does not sync as you call it .

it remains at 1.00

UI goes through maybe devs forgot to update the version number in the file.
Reply
#4
Mine ESPION's are pretty much updated succesfully.
There is no way to check UI version after or before the update, INFO menu of ESPION displays only Firmware and Hardware. You can't, obviously, change the Hardware version - it will stay the same, because you didn't change the Hardware (the device body is still the same).
So, you download a V1.01 ZIP file, unpack, chose 1.01 file for Firmware and update it. Number of firmware changes to 1.01 both in updater and in device. After that, you press UI button and update UI with 1.01UI file. It will show "Update Complete" on PC screen. This is the only way to know that you have updated UI.

But if you have an eagle eye, you will see that 1.01 UI has slightly gradient wallpaper, getting darker from left side to right side. Also, font is slightly changed.

Please, confirm that you not mistaking UI version and Hardware version.
Technical Specialist at Vardex, Russia.
Joyetech aficionado.
Reply
#5
(04-17-2018, 06:26 PM)Crazybasil Wrote:  Mine ESPION's are pretty much updated succesfully.
There is no way to check UI version after or before the update, INFO menu of ESPION displays only Firmware and Hardware. You can't, obviously, change the Hardware version - it will stay the same, because you didn't change the Hardware (the device body is still the same).
So, you download a V1.01 ZIP file, unpack, chose 1.01 file for Firmware and update it. Number of firmware changes to 1.01 both in updater and in device. After that, you press UI button and update UI with 1.01UI file. It will show "Update Complete" on PC screen. This is the only way to know that you have updated UI.

But if you have an eagle eye, you will see that 1.01 UI has slightly gradient wallpaper, getting darker from left side to right side. Also, font is slightly changed.

Please, confirm that you not mistaking UI version and Hardware version.



Yes i have mistaken the UI as hardware version 微笑

I do see the gradient wallpaper, getting darker from left side to right side.

Thank you for solving this 大咧嘴
Reply
#6
(04-18-2018, 07:05 AM)Siggy Wrote:  Thank you for solving this  大咧嘴

My pleasure, dear friend. Please, enjoy your ESPION!
Technical Specialist at Vardex, Russia.
Joyetech aficionado.
Reply


Bookmarks

Forum Jump:


Users browsing this thread: 1 Guest(s)