Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VT Software to Upgrade Cuboid TAP
#1
This VT software is for upgrading your Cuboid TAP to the latest Firmware Version.

What’s special in Version 6.05?
Over 10s Protection
For safety reasons, if you hold the fire button for 10 seconds, the device will shout down automatically. Press the fire button 5 times to turn it on again.

[Image: Cuboid_TAP_01.png]


Have you ever tried it? Click here http://www.joyetech.com/mvr-software/?sid=237?age-verified=d7abb693dc for more informations.

Any ideas or suggestions will be great!
[Image: logo2.png]
Premier Electronic Cigarette Manufacturer.
Reply
#2
I think the automatic shut down will be an awesome feature,especially for those who almost always carry their mod in their pocket! It would be perfect imo ! no more accidental burnt coils and no accidentally over-heating batteries! 心
微笑  smoke free since January 2014 ?微笑
Reply
#3
(05-16-2017, 12:49 AM)Vapeoholic Wrote:  Still getting used to the settings on the cuboid tap liking them so far .. do I need to put this on mine or does it come with it already ?

Yes, it has already owned! 大咧嘴
[Image: logo2.png]
Premier Electronic Cigarette Manufacturer.
Reply
#4
(05-15-2017, 07:23 PM)liz Wrote:  I think the automatic shut down will be an  awesome feature,especially for those who almost always carry their mod in their pocket! It would be perfect imo ! no more accidental burnt coils and no accidentally over-heating batteries!  心

微笑 Mhm...convenient to carry-on
[Image: logo2.png]
Premier Electronic Cigarette Manufacturer.
Reply
#5
This Is a good idea I can't wait to get one just holding out for a green one I'm due for a new mod
Reply
#6
(05-18-2017, 10:15 AM)bey1012 Wrote:  This Is a good idea I can't wait to get one just holding out for a green one I'm due for a new mod

I agree... I so can not get that purple out of my head 微笑 心 ...we need purple.... and green too 大咧嘴 a good 3 years wanting purple 心 come on Joyetech 想法
微笑  smoke free since January 2014 ?微笑
Reply
#7
(05-18-2017, 06:20 PM)liz Wrote:  
(05-18-2017, 10:15 AM)bey1012 Wrote:  This Is a good idea I can't wait to get one just holding out for a green one I'm due for a new mod

I agree... I so can not get that purple out of my head  微笑  心 ...we need purple.... and green too  大咧嘴  a good 3 years wanting purple  心  come on Joyetech   想法

Really would be cool if they used my design of the purple and green 大咧嘴
Reply
#8
Hello!
I'm about to update software on Cuboid Tap. I'm running software updater on virtual machine (host is Linux), and sometimes there are problems with the update due to multiple USB reconnections. Before updating, I always check to see if there will be an option to perform emergency recovery, as described here: http://www.joyetech.com/steps-on-vt-software-win/
I've tried to connect Tap with pressed + button (without batteries), but it never boot in recovery mode, it just starting as usual.
Is this workaround not working for Tap?

[Image: pgRQWbr.png]

Thanks in advance!
Reply
#9
(07-03-2017, 08:14 PM)Kindler Wrote:  Hello!
I'm about to update software on Cuboid Tap. I'm running software updater on virtual machine (host is Linux), and sometimes there are problems with the update due to multiple USB reconnections. Before updating, I always check to see if there will be an option to perform emergency recovery, as described here: http://www.joyetech.com/steps-on-vt-software-win/
I've tried to connect Tap with pressed + button (without batteries), but it never boot in recovery mode, it just starting as usual.
Is this workaround not working for Tap?
[Image: pgRQWbr.png]
Thanks in advance!

As long as the TAP boots you have succeeded in updating the device. check the updater program with the device plugged to the pc to see the version of your device. I don't know if pressing the touch + works on the tap.
Reply
#10
(07-04-2017, 01:30 AM)CosmicTruth Wrote:  As long as the TAP boots you have succeeded in updating the device

I didn't update it. First I want to check if the "recovery mode" is available here 微笑
As I wrote earlier, time at time I face some errors during update under virtual machine with Windows. Some my boxes (Pico 75 and VTwo Mini) can't be updated successfully, they are became "semi-bricked": black screen, no reactions on buttons / USB connection etc. Only workaround with pressed "+" button on connecting to PC did the trick, then I can re-flash them and return to live.
So it's already a habit: if I can put my new box in this mode, I can upgrade firmware without any issue afterwards.
Tap is the first box that I can not persuade to do so 大咧嘴
Reply


Bookmarks

Forum Jump:


Users browsing this thread: 1 Guest(s)