Joyetech Social
Ultex T80 & Cubis Max - NC Film heater - Printable Version

+- Joyetech Social (http://social.joyetech.com)
+-- Forum: Question, Suggestion & Feedback (http://social.joyetech.com/forumdisplay.php?fid=3)
+--- Forum: Specific Products Discussion (http://social.joyetech.com/forumdisplay.php?fid=130)
+--- Thread: Ultex T80 & Cubis Max - NC Film heater (/showthread.php?tid=30361)



Ultex T80 & Cubis Max - NC Film heater - Ippolit - 10-06-2018

[attachment=3659]

Ultex T80 & Cubis Max with NC Film heater

Discussion & questions for this device in this thread.


RE: Ultex T80 & Cubis Max - NC Film heater - CosmicTruth - 10-07-2018

You forgot to include a link:
ULTEX T80 with CUBIS Max
This is the easiest device to maintain that I own, and the tiny cotton wick pads are quite inexpensive. Using Vapor Tech Organic Cotton Pads, I cut them to measure 0.5" X 0.6", set the wick under the coil, prime it, and reassemble the atomizer. Using these Pads there is no spitback, the device produces a thick full vapor, and works with a single 18650 battery.