Joyetech Social
VT Software to Upgrade eVic-VTC Mini - Printable Version

+- Joyetech Social (http://social.joyetech.com)
+-- Forum: Downloads (http://social.joyetech.com/forumdisplay.php?fid=9)
+--- Forum: Software (http://social.joyetech.com/forumdisplay.php?fid=146)
+---- Forum: eVic-VTC Mini (http://social.joyetech.com/forumdisplay.php?fid=168)
+---- Thread: VT Software to Upgrade eVic-VTC Mini (/showthread.php?tid=2241)

Pages: 1 2 3 4 5


VT Software to Upgrade eVic-VTC Mini - Kermit - 10-16-2015

This VT software is for upgrading your eVic-VTC Mini to the latest Firmware.
Your temperature control device will be always up to date because of upgradeable firmware.

[Image: eVic_VTC_Mini_with_CUBIS_14.png]

Up till now, we have released eight Versions: V3.03, V3.02, V3.01, V3.0, V2.0, V1.02, V1.10 and V1.02.

Here to check: VT Software to Upgrade eVic-VTC Mini

Have you ever tried it?

Any ideas or suggestions will be great!  微笑  
[Image: eVic-VTC_V3.03.png]


RE: VT Software for upgrading eVic-VTC Mini - Smok_King - 10-16-2015

Hi Kermit.
You guys are doing a great job keeping up with the trend.
Perfect that you move the wattage up to 75W.
Can we have Stainless Steel wire mode added to the VTC?
That will put Joyetech at the front of the pack.

Thanks again and have a gr8 weekend. 微笑


RE: VT Software for upgrading eVic-VTC Mini - Kermit - 10-17-2015

You're welcome. And yes, we're on the move. 舌


RE: VT Software for upgrading eVic-VTC Mini - Smok_King - 10-17-2015

(10-17-2015, 08:00 AM)Kermit Wrote:  You're welcome. And yes, we're on the move. 舌

心 心 舌


RE: VT Software for upgrading eVic-VTC Mini - user359 - 10-18-2015

(10-17-2015, 08:00 AM)Kermit Wrote:  You're welcome. And yes, we're on the move. 舌

SS and/or full TCR setting. Can't wait.

The software for the firmware update is simple. That's good.

I removed my battery but update did not work until I removed my atomiser.
I was relieved the first failed attempt did not brick my device. Good job.

Might be a good idea to add some text about that in the main window software. "Remove battery, atomiser and..."

The software even works in a Virtual Machine which makes me happy as I'm using a linux host. I had to add two usb devices on Win7 guest. One is recognised before Windows boots, the other after.


RE: VT Software for upgrading eVic-VTC Mini - Madboy - 10-24-2015

Kermit

I would like to see in a firmware upgrade on the "Seconds" counter at the bottom of the unit. So instead of seconds i would like 00:00:00 (Hours:Minutes:Seconds).

So the display below should read 00:43:46

[Image: P1080224.jpg]

Thanks in advance

Madboy


RE: VT Software for upgrading eVic-VTC Mini - djermy - 10-27-2015

hey kermit iam having trouble getting my mini to update it keeps giving me a system parameter commond fail any ideas


RE: VT Software for upgrading eVic-VTC Mini - Madboy - 10-27-2015

(10-27-2015, 11:29 AM)djermy Wrote:  hey kermit iam having trouble getting my mini to update it keeps giving me a system parameter commond fail any ideas

Remove the battery and try and update the Evic Mini.

Regards

Madboy


RE: VT Software for upgrading eVic-VTC Mini - lenivets - 10-29-2015

Suggestion: Support of Stainless steel will be great !
Idea: Calculation of optimal Watt for current resistant.

I got 3 eVic + eGrip is coming.. got yesterday 50m of 0.4 SS wire.. but can't use it 悲伤
My friend is looking for some Box and comparing now X cube (SS support) and eVic - guys help me to bring his choice to eVic 微笑


RE: VT Software for upgrading eVic-VTC Mini - BlackCRX - 10-30-2015

Please use 0.0058-0.006 nickel coefficient for accurate vaping temperature. Currently I have to set it approx 50-100F higher than my other temperature control devices to get the same quality of vape.

I have posted my theory and calculations in the social forum. Thank you.